35 Mechanic jobs

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer Field Service Technician/Full-time              

Ahern Rentals is looking for a Shop Mechanic with thorough knowledge of power, electrical and hydraulic systems including theory to maintain our fleet of rental equipment at its peak performance. Incentive Package includes: Competitive pay Paid Vacation Paid Holidays 401K Retirement Plan Benefits after the first of the month following 60 days will include: Medical, Dental, Vision & Life Supplemental Insurance Options Available Employee and Customer Incentive Bonus Programs Essential Duties and Responsibilities: Overhaul and repair electric and fuel system engines Troubleshoot, repair and maintain heavy duty and other construction machinery Inspect work to ensure repairs and replacement have been completed correctly Maintain cleanliness and safety of the shop and yard Other duties as assigned by management Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Qualifications: Previous equipment mechanical experience required Must possess own tools Must be able to work on several types and brands of equipment Must be able to read and understand electrical & hydraulic schematics Basic welding skills preferred Basic computer skills preferred Must be able to read, write, and speak English Must be able to pass drug test and background check. Must be able to provide Motor Vehicle Record at the of job offer (current within 15 days) Job Type: Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer Field Service Technician/Full-time              

Ahern Rentals is looking for Heavy Equipment Lube Technician to perform preventive maintenance on our fleet of rental equipment. The Heavy Equipment Lube Technician is responsible for greasing company equipment, including heavy equipment or semi tractors and trailers, changing fluids in company equipment and maintaining accurate service records. Actively participates and displays the company values. Must have a valid driver's license and good driving record. Essential Duties and Responsibilities: Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery · Inspect work to ensure repairs and replacements have been completed correctly · Clean equipment with pressure washer · Maintain cleanliness and safety of the shop and yard · Other duties as assigned by management Qualifications: Previous experience required · Must have own tools · Must be able to read, write, and speak English · Must be able to pass drug test and background check · Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days) Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Ahern Rentals, Inc. is an Equal Opportunity Employer Lube Technician/Full-time

Ahern Rentals is looking for Heavy Equipment Lube Technician to perform preventive maintenance on our fleet of rental equipment. The Heavy Equipment Lube Technician is responsible for greasing company equipment, including heavy equipment or semi tractors and trailers, changing fluids in company equipment and maintaining accurate service records. Actively participates and displays the company values. Must have a valid driver's license and good driving record. Essential Duties and Responsibilities: Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery · Inspect work to ensure repairs and replacements have been completed correctly · Clean equipment with pressure washer · Maintain cleanliness and safety of the shop and yard · Other duties as assigned by management Qualifications: Previous experience required · Must have own tools · Must be able to read, write, and speak English · Must be able to pass drug test and background check · Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days) Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Ahern Rentals, Inc. is an Equal Opportunity Employer Lube Technician/Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer Field Service Technician/Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer Field Service Technician/Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer Field Service Technician/Full-time

This is skilled mechanical work in the repair and maintenance of automotive and heavy duty equipment. Incumbents are responsible for the performance of the major repair of heavy automotive equipment and construction machinery. Supervision is exercised over equipment mechanics of lower classification. Heavy equipment mechanics repair and maintain heavy machineries used in construction projects and other similar activities. They are highly trained to work safely and assure that they can protect themselves from injury. Essential Duties and Responsibilities: May or may not include: Overhauls and repairs engines, disassembles engines, replaces defective parts, reassembles, makes adjustment to electric and fuel systems. Repairs and maintains heavy duty and other construction machinery in the shop. Assigns duties to assistants. Inspects work in progress to see that repairs and replacements are properly made and units are satisfactorily assembled. Does skilled repair work in installing timing gears, fitting crankshafts, crankshaft cylinders, and repairing hydraulic systems. Inspects, repairs and adjusts steering clutches Must be able to satisfy class B & C requirements Ability to troubleshoot and repair electrical, gas and diesel customer owned equipment. May be required to change out forks or attachments. May have to run pressure washers to clean equipment. May have to drive machines on public roadways. May have to run an occasional service calls Must be able to maintain a safe, reasonably clean and organized work environment. May be required to complete repairs at jobsites Other duties or tasks may be assigned on an as-needed basis Qualifications: Required to have a minimum 5 years Hard Down Mechanical Experience Must be able to read English. Must possess own tools. Must be able to safely operate various types of hard down equipment Must be able to wear safety fall protection Must be able to follow directions. Must be able to work basic computer functions. Must have a large assortment of hand & power tools. Must have Steel Toe Work boots. Basic welding skills preferred. Must be able to read, understand Electrical Schematics & theory of how the systems work. Must be able to read, understand Hydraulic Schematics & theory of how the systems work. Must be very good at using test equipment, meters, gauges, hand-helds, lap tops, etc. Must be able to properly use the parts manuals to look up and order correct replacement parts. Must be able to work shop equipment such as cranes, port-o-powers, chain hoists, etc. Valid Driver's license and clean driving record is preferred. Must have tools needed to complete B & C positons Class A mechanics must have a thorough knowledge of power, electrical and hydraulic systems including theory. They need to be able to diagnose complex electrical, hydraulic & power system problems. Class A mechanics must be capable of complete tear down, inspection and repair of the machines. Physical Demands: While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. The employee is occasionally required to walk, sit, talk, write and hear. The employee must frequently lift, push, pull, and/or move weights varying between 25 - 100 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee frequently works near moving mechanical parts or in outside weather conditions. The employee is required to wear protective gear when exposed fumes, grease, oils, toxic or caustic chemicals. The noise level in the work environment is usually loud. Mechanics typically work in repair shops or in outside work areas depending on the size of the facility. The work shops are well lighted and ventilated. An employee of this position may be exposed to poor weather conditions, including extreme heat. They may also work in cramped or awkward positions to reach a machine's engine. Mechanics and are exposed in hazardous work environment, must be able to be outside in the elements anywhere from 5% to 95% of shift. Ahern Rentals is an EOE Job Type: Full-time

This is skilled mechanical work in the repair and maintenance of automotive and heavy duty equipment. Incumbents are responsible for the performance of tasks in moderate repair of heavy automotive equipment and construction machinery. Heavy equipment mechanics repair and maintain heavy machineries used in construction projects and other similar activities. They are highly trained to work safely and assure that they can protect themselves from injury. Essential Duties and Responsibilities: May or may not include: · Overhauls and repairs engines, disassembles engines, replaces defective parts, reassembles, makes adjustment to electric and fuel systems. · Repairs and maintains heavy duty and other construction machinery in the shop. · Assigns duties to assistants (if applicable) · Inspects work in progress to see that repairs and replacements are properly made and units are satisfactorily assembled. · Does skilled repair work in installing timing gears, fitting crankshafts, crankshaft cylinders, and repairing hydraulic systems. · Inspects, repairs and adjusts steering clutches · Must be able to satisfy class C requirements · Have basic knowledge to troubleshoot and repair electrical, gas and diesel customer owned equipment. · May be required to change out forks or attachments. · May have to run pressure washers to clean equipment. · May have to drive machines on public roadways. · May have to run an occasional service calls · Must be able to maintain a safe, reasonably clean and organized work environment. · Other duties or tasks may be assigned on an as-needed basis Organizational Relationships: This position reports to and is in constant communication with their Service Manager, and in some locations a shop supervisor. On occasion it will be necessary to contact the Branch Operations Manager. Fairly often there will be contact with co-workers of multiple departments. Qualifications: Must have either a minimum 2 years High Reach mechanical experience or trade school training and 6 months High Reach mechanical experience. Must be able to read English. Must be able to safely operate various types of high reach equipment including forklifts, scissor lifts, boom lifts Must be able to wear safety fall protection Must be able to follow directions. Must be able to work basic computer functions. Must have Minimum Class "B" Hand & power tools Must have Steel Toe Work boots. Basic welding skills preferred Must be able to read and understand Electrical Schematics Must be able to read and understand Hydraulic Schematics Must be able to properly use test equipment, gauges, meters & hand-helds Must be able to properly use parts manuals to obtain parts and order parts. Must be able to maintain a safe, reasonably clean and organized work environment. Valid Driver's license and clean driving record is preferred. Class B mechanics must have basic knowledge of power, electrical and hydraulic systems. They need to be able to check and adjust hydraulic pressures, run electronic self diagnostic systems & diagnose engine problems. The following is the minimum tool requirement for class B mechanics: 1) Wrench sets 5/16” to 2” 2) Metric wrench set 6mm to 30mm 3) Complete set of screwdrivers 4) Pick set 5) Complete set of Metric & Sae ¼” & 3/8” drive sockets 6) Complete set of Metric & Sae ½” drive sockets 7) Spark plug sockets: 5/8”, 3/4” & 13/16” 8) 7/16-7/8” line wrenches 9) 8”, 10” and 12” adjustable wrench 10) 24” pipe wrench 11) Torque Wrench ½” drive ft lbs 12) ½” drive impact wrench 13) Die Grinder with cut off attachment 14) Power drill, (air or electric) at least 3/8” 15) Impact sockets; ½” to 1” & 10mm to 19mm 16) Hammers; Ball Peen, Dead blow & rubber mallet 17) Punch and Chisel assortment 18) Various pry bars, small, medium & large 19) Tape measure 20) Pliers: regular, slip joint & needle nose 21) Vice grips-assortment 22) Diagonal pliers (dikes) 23) Electrical Crimping/stripping tool. 24) Snap ring pliers both internal & external 25) Strap oil filter wrench 26) Basic Allen wrench set-metric and SAE 27) Seal pullers 28) Seal installation tools 29) Set screw extractors 30) Small Drill bits set 3/16”-3/8” 31) Tool box with lock 32) Spark tester 33) Spark plug gapping tool 34) Feeler gauges 35) Test light 36) Grease Gun with flexible tip 37) Battery terminal puller and Battery terminal cleaning tool 38) Digital Volt meter with various leads 39) Rolling Creeper 40) Working Flashlight 41) Work Boots – Must be steel toe Physical Demands: While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. The employee is occasionally required to walk, sit, talk, write and hear. The employee must frequently lift, push, pull, and/or move weights varying between 25 - 100 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee frequently works near moving mechanical parts or in outside weather conditions The employee is required to wear protective gear when exposed fumes, grease, oils, toxic or caustic chemicals. The noise level in the work environment is usually loud. Mechanics typically work in repair shops or in outside work areas depending on the size of the facility. The work shops are well lighted and ventilated. An employee of this position may be exposed to poor weather conditions, including extreme heat. They may also work in cramped or awkward positions to efficiently service equipment. On occasion A class "B" Mechanic will be required to travel to a jobsite to perform maintenance on equipment rented by customers. Mechanics and are exposed in hazardous work environment, must be able to be outside in the elements anywhere from 5% to 95% of shift, depending on the size of the location. Ahern Rentals, Inc. is an Equal Opportunity Employer Job Type: Full-time

This is skilled mechanical work in the repair and maintenance of automotive and heavy duty equipment. Incumbents are responsible for the performance of the major repair of heavy automotive equipment and construction machinery. Supervision is exercised over equipment mechanics of lower classification. Heavy equipment mechanics repair and maintain heavy machineries used in construction projects and other similar activities. They are highly trained to work safely and assure that they can protect themselves from injury. Essential Duties and Responsibilities: May or may not include: Overhauls and repairs engines, disassembles engines, replaces defective parts, reassembles, makes adjustment to electric and fuel systems. Repairs and maintains heavy duty and other construction machinery in the shop. Assigns duties to assistants. Inspects work in progress to see that repairs and replacements are properly made and units are satisfactorily assembled. Does skilled repair work in installing timing gears, fitting crankshafts, crankshaft cylinders, and repairing hydraulic systems. Inspects, repairs and adjusts steering clutches Must be able to satisfy class B & C requirements Ability to troubleshoot and repair electrical, gas and diesel customer owned equipment. May be required to change out forks or attachments. May have to run pressure washers to clean equipment. May have to drive machines on public roadways. May have to run an occasional service calls Must be able to maintain a safe, reasonably clean and organized work environment. May be required to complete repairs at jobsites Other duties or tasks may be assigned on an as-needed basis Qualifications: Required to have a minimum 5 years Hard Down Mechanical Experience Must be able to read English. Must possess own tools. Must be able to safely operate various types of hard down equipment Must be able to wear safety fall protection Must be able to follow directions. Must be able to work basic computer functions. Must have a large assortment of hand & power tools. Must have Steel Toe Work boots. Basic welding skills preferred. Must be able to read, understand Electrical Schematics & theory of how the systems work. Must be able to read, understand Hydraulic Schematics & theory of how the systems work. Must be very good at using test equipment, meters, gauges, hand-helds, lap tops, etc. Must be able to properly use the parts manuals to look up and order correct replacement parts. Must be able to work shop equipment such as cranes, port-o-powers, chain hoists, etc. Valid Driver's license and clean driving record is preferred. Must have tools needed to complete B & C positons Class A mechanics must have a thorough knowledge of power, electrical and hydraulic systems including theory. They need to be able to diagnose complex electrical, hydraulic & power system problems. Class A mechanics must be capable of complete tear down, inspection and repair of the machines. Physical Demands: While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. The employee is occasionally required to walk, sit, talk, write and hear. The employee must frequently lift, push, pull, and/or move weights varying between 25 - 100 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee frequently works near moving mechanical parts or in outside weather conditions. The employee is required to wear protective gear when exposed fumes, grease, oils, toxic or caustic chemicals. The noise level in the work environment is usually loud. Mechanics typically work in repair shops or in outside work areas depending on the size of the facility. The work shops are well lighted and ventilated. An employee of this position may be exposed to poor weather conditions, including extreme heat. They may also work in cramped or awkward positions to reach a machine's engine. Mechanics and are exposed in hazardous work environment, must be able to be outside in the elements anywhere from 5% to 95% of shift. Ahern Rentals is an EOE Job Type: Full-time

This is skilled mechanical work in the repair and maintenance of automotive and heavy duty equipment. Incumbents are responsible for the performance of the major repair of heavy automotive equipment and construction machinery. Supervision is exercised over equipment mechanics of lower classification. Heavy equipment mechanics repair and maintain heavy machineries used in construction projects and other similar activities. They are highly trained to work safely and assure that they can protect themselves from injury. Essential Duties and Responsibilities: May or may not include: Overhauls and repairs engines, disassembles engines, replaces defective parts, reassembles, makes adjustment to electric and fuel systems. Repairs and maintains heavy duty and other construction machinery in the shop. Assigns duties to assistants. Inspects work in progress to see that repairs and replacements are properly made and units are satisfactorily assembled. Does skilled repair work in installing timing gears, fitting crankshafts, crankshaft cylinders, and repairing hydraulic systems. Inspects, repairs and adjusts steering clutches Must be able to satisfy class B & C requirements Ability to troubleshoot and repair electrical, gas and diesel customer owned equipment. May be required to change out forks or attachments. May have to run pressure washers to clean equipment. May have to drive machines on public roadways. May have to run an occasional service calls Must be able to maintain a safe, reasonably clean and organized work environment. May be required to complete repairs at jobsites Other duties or tasks may be assigned on an as-needed basis Qualifications: Required to have a minimum 5 years Hard Down Mechanical Experience Must be able to read English. Must possess own tools. Must be able to safely operate various types of hard down equipment Must be able to wear safety fall protection Must be able to follow directions. Must be able to work basic computer functions. Must have a large assortment of hand & power tools. Must have Steel Toe Work boots. Basic welding skills preferred. Must be able to read, understand Electrical Schematics & theory of how the systems work. Must be able to read, understand Hydraulic Schematics & theory of how the systems work. Must be very good at using test equipment, meters, gauges, hand-helds, lap tops, etc. Must be able to properly use the parts manuals to look up and order correct replacement parts. Must be able to work shop equipment such as cranes, port-o-powers, chain hoists, etc. Valid Driver's license and clean driving record is preferred. Must have tools needed to complete B & C positons Class A mechanics must have a thorough knowledge of power, electrical and hydraulic systems including theory. They need to be able to diagnose complex electrical, hydraulic & power system problems. Class A mechanics must be capable of complete tear down, inspection and repair of the machines. Physical Demands: While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. The employee is occasionally required to walk, sit, talk, write and hear. The employee must frequently lift, push, pull, and/or move weights varying between 25 - 100 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee frequently works near moving mechanical parts or in outside weather conditions. The employee is required to wear protective gear when exposed fumes, grease, oils, toxic or caustic chemicals. The noise level in the work environment is usually loud. Mechanics typically work in repair shops or in outside work areas depending on the size of the facility. The work shops are well lighted and ventilated. An employee of this position may be exposed to poor weather conditions, including extreme heat. They may also work in cramped or awkward positions to reach a machine's engine. Mechanics and are exposed in hazardous work environment, must be able to be outside in the elements anywhere from 5% to 95% of shift. Ahern Rentals is an EOE Job Type: Full-time

This is skilled mechanical work in the repair and maintenance of automotive and heavy duty equipment. Incumbents are responsible for the performance of the major repair of heavy automotive equipment and construction machinery. Supervision is exercised over equipment mechanics of lower classification. Heavy equipment mechanics repair and maintain heavy machineries used in construction projects and other similar activities. They are highly trained to work safely and assure that they can protect themselves from injury. Essential Duties and Responsibilities: May or may not include: Overhauls and repairs engines, disassembles engines, replaces defective parts, reassembles, makes adjustment to electric and fuel systems. Repairs and maintains heavy duty and other construction machinery in the shop. Assigns duties to assistants. Inspects work in progress to see that repairs and replacements are properly made and units are satisfactorily assembled. Does skilled repair work in installing timing gears, fitting crankshafts, crankshaft cylinders, and repairing hydraulic systems. Inspects, repairs and adjusts steering clutches Must be able to satisfy class B & C requirements Ability to troubleshoot and repair electrical, gas and diesel customer owned equipment. May be required to change out forks or attachments. May have to run pressure washers to clean equipment. May have to drive machines on public roadways. May have to run an occasional service calls Must be able to maintain a safe, reasonably clean and organized work environment. May be required to complete repairs at jobsites Other duties or tasks may be assigned on an as-needed basis Qualifications: Required to have a minimum 5 years Hard Down Mechanical Experience Must be able to read English. Must possess own tools. Must be able to safely operate various types of hard down equipment Must be able to wear safety fall protection Must be able to follow directions. Must be able to work basic computer functions. Must have a large assortment of hand & power tools. Must have Steel Toe Work boots. Basic welding skills preferred. Must be able to read, understand Electrical Schematics & theory of how the systems work. Must be able to read, understand Hydraulic Schematics & theory of how the systems work. Must be very good at using test equipment, meters, gauges, hand-helds, lap tops, etc. Must be able to properly use the parts manuals to look up and order correct replacement parts. Must be able to work shop equipment such as cranes, port-o-powers, chain hoists, etc. Valid Driver's license and clean driving record is preferred. Must have tools needed to complete B & C positons Class A mechanics must have a thorough knowledge of power, electrical and hydraulic systems including theory. They need to be able to diagnose complex electrical, hydraulic & power system problems. Class A mechanics must be capable of complete tear down, inspection and repair of the machines. Physical Demands: While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. The employee is occasionally required to walk, sit, talk, write and hear. The employee must frequently lift, push, pull, and/or move weights varying between 25 - 100 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee frequently works near moving mechanical parts or in outside weather conditions. The employee is required to wear protective gear when exposed fumes, grease, oils, toxic or caustic chemicals. The noise level in the work environment is usually loud. Mechanics typically work in repair shops or in outside work areas depending on the size of the facility. The work shops are well lighted and ventilated. An employee of this position may be exposed to poor weather conditions, including extreme heat. They may also work in cramped or awkward positions to reach a machine's engine. Mechanics and are exposed in hazardous work environment, must be able to be outside in the elements anywhere from 5% to 95% of shift. Ahern Rentals is an EOE Job Type: Full-time

Ahern Rentals is looking for a Shop Mechanic with thorough knowledge of power, electrical and hydraulic systems including theory to maintain our fleet of rental equipment at its peak performance. Incentive Package includes: Competitive pay Paid Vacation Paid Holidays 401K Retirement Plan Benefits after the first of the month following 60 days will include: Medical, Dental, Vision & Life Supplemental Insurance Options Available Employee and Customer Incentive Bonus Programs Essential Duties and Responsibilities: Overhaul and repair electric and fuel system engines Troubleshoot, repair and maintain heavy duty and other construction machinery Inspect work to ensure repairs and replacement have been completed correctly Maintain cleanliness and safety of the shop and yard Other duties as assigned by management Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Qualifications: Previous equipment mechanical experience required Must possess own tools Must be able to work on several types and brands of equipment Must be able to read and understand electrical & hydraulic schematics Basic welding skills preferred Basic computer skills preferred Must be able to read, write, and speak English Must be able to pass drug test and background check. Must be able to provide Motor Vehicle Record at the of job offer (current within 15 days) Job Type: Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer Field Service Technician/Full-time              

Ahern Rentals is looking for a Shop Mechanic with thorough knowledge of power, electrical and hydraulic systems including theory to maintain our fleet of rental equipment at its peak performance. Incentive Package includes: Competitive pay Paid Vacation Paid Holidays 401K Retirement Plan Benefits after the first of the month following 60 days will include: Medical, Dental, Vision & Life Supplemental Insurance Options Available Employee and Customer Incentive Bonus Programs Essential Duties and Responsibilities: Overhaul and repair electric and fuel system engines Troubleshoot, repair and maintain heavy duty and other construction machinery Inspect work to ensure repairs and replacement have been completed correctly Maintain cleanliness and safety of the shop and yard Other duties as assigned by management Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Qualifications: Previous equipment mechanical experience required Must possess own tools Must be able to work on several types and brands of equipment Must be able to read and understand electrical & hydraulic schematics Basic welding skills preferred Basic computer skills preferred Must be able to read, write, and speak English Must be able to pass drug test and background check. Must be able to provide Motor Vehicle Record at the of job offer (current within 15 days) Job Type: Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer              

Ahern Rentals is looking for a mechanic with thorough knowledge of power, electrical and hydraulic systems including theory to maintain our fleet of rental equipment at its peak performance. Incentive Package includes: Competitive pay Paid Vacation Paid Holidays 401k Retirement Plan Benefits after the first of the month following 60 days will include: Medical, Dental, Vision & Life Supplemental Insurance Options Available Employee and Customer Incentive Bonus Programs Essential Duties and Responsibilities Overhaul and repair electric and fuel system engines Troubleshoot, repair and maintain heavy duty and other construction machinery Inspect work to ensure repairs and replacements have been completed correctly Clean equipment with pressure washer Respond to service calls at customers work sites Maintain cleanliness and safety of the shop and yard Other duties as assigned by management Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position Qualifications Previous high reach mechanical experience required Must possess own tools Must be able to work on several types and brands of equipment Must be able to read and understand electrical & hydraulic schematics Basic welding skills preferred Basic computer skills preferred Must be able to read, write, and speak English Must be able to pass drug test and background check Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days) Job Type: Full-time

Ahern Rentals is looking for a Shop Mechanic with thorough knowledge of power, electrical and hydraulic systems including theory to maintain our fleet of rental equipment at its peak performance. Incentive Package includes: · Competitive pay · Paid Vacation · Paid Holidays · 401K Retirement Plan · Benefits after the first of the month following 60 days will include: Medical, Dental, Vision & Life · Supplemental Insurance Options Available · Employee and Customer Incentive Bonus Programs Essential Duties and Responsibilities: · Overhaul and repair electric and fuel system engines · Troubleshoot, repair and maintain heavy duty and other construction machinery · Inspect work to ensure repairs and replacement have been completed correctly · Maintain cleanliness and safety of the shop and yard · Other duties as assigned by management Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Qualifications: · Previous equipment mechanical experience required · Must possess own tools · Must be able to work on several types and brands of equipment · Must be able to read and understand electrical & hydraulic schematics · Basic welding skills preferred · Basic computer skills preferred · Must be able to read, write, and speak English · Must be able to pass drug test and background check. Must be able to provide Motor Vehicle Record at the of job offer (current within 15 days) Job Type: Full-time

Responsible for the daily response of service calls of a mechanical nature at our customers jobsites. When heavy or mobile equipment breaks down at a construction site, it may be too difficult or expensive to bring into a repair shop, so the shop will send a person in this position to the site to make repairs. Field service technicians work outdoors and spend much of their time away from the shop while driving trucks specially equipped with the replacement parts and tools needed to complete the job. This is a non-exempt level position.   Essential Duties and Responsibilities:   May or may not include:   Repairing and maintaining vehicles and equipment with mechanical, electrical, hydraulic and pneumatic systems Ability to troubleshoot and repair electrical, gas and diesel rental equipment Travel to local worksites to complete repairs on various types of rental equipment Other duties or tasks may be assigned on an as-needed basis                                                                                                                                                 Organizational Relationships:   This position reports directly with the locations Service Manager. There will frequently be times where this position will need to communicate with other shop supervisors or mechanics in this location. Occasionally, queries will need to be made to the parts personnel.   Qualifications:   Knowledge and operation of construction equipment would be beneficial Truck and diesel engine experience would be considered an asset Must possess own tools Ability to pass a drug screen A customer friendly disposition and a safety first attitude Must possess a team orientated spirit Must have a good driving record Must be able to provide Motor Vehicle Record at time of job offer (current within 15 days)   Physical Requirements: Ability to lift, push, or pull equipment weighing up 50 pounds, the agility to climb over and into equipment and the dexterity to work at heights over 10 feet. While performing the duties of this job, the employee is regularly required to stand; walk, use hands to finger, handle, feel or operate objects; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, bend, crouch, or crawl. Specific vision abilities required by this job include close vision.   Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   Work Environment: Field Service Technicians usually spend the majority of their time in outside weather conditions and are required to travel to local jobsites to repair vehicles and equipment. This position often is required to lift heavy parts and tools, handle greasy and dirty parts, and stand or lie in awkward positions. Although some jobsites may be drafty and noisy, technicians usually work in well-lit and ventilated areas. These jobsites may contain a number of hazardous areas, however, accidents normally can be avoided as long as safety practices are observed. While driving, Field Service Technicians are exposed to noise and minor vibration levels, occasional poor weather conditions and busy traffic settings. . This position may have to deal with difficult or irate customers, which can be challenging. However, the ability to resolve customers’ problems has the potential to be very rewarding. Ahern Rentals, Inc. is an Equal Opportunity Employer